Coleman Technologies Blog

What is Encryption?
Encryption is a security measure meant to thwart any would-be hackers from using your stolen data to further their ambitions. Think about it like this; without encryption, hackers would gain access to your files, plain as day. Encryption provides a measure that keeps hackers from using your organization’s data even if they were to gain access to it. It essentially scrambles data to everyone who doesn’t have the decryption key, rendering it useless.

One particular technology that uses encryption to a considerable degree is a virtual private network, or VPN. A VPN can connect your employees to your infrastructure regardless of their location in a secure way. Think of it like this; the connection between your employee’s device and your network is normally a clear tube that can be observed by anyone ambitious enough to look for it. Rather than leave it as is, encryption makes the tube opaque--enough to obscure what’s inside so it’s not quite clear for any unwanted onlookers.

Why is it Important?
You can imagine the immense importance of encryption in today’s data-oriented business world. If you’re not taking every measure possible to secure your data, you could be making a huge mistake. Encryption in particular is important for assuming the absolute worst. You can never know when your data will be stolen, so it’s best to take preventative measures to ensure that it will cause a minimal amount of damage should it occur. If your encrypted data is stolen, it will simply be unusable without spending far too much effort to get the data into a readable state.

Coleman Technologies can equip your business with encryption services that you can count on to keep your data as safe as can be. To learn more, reach out to us at (604) 513-9428.

What Does Restarting the Computer Do?
You might think of restarting the computer as something that cuts down on productivity, but this is far from the truth. While it stops you from working in the interim, it’s beneficial in the long run to routinely restart your computer for periodic updates and general upkeep. Have you ever tried to run a machine all the time without giving it a break every now and then? When you do this, it’s more likely that the device will be run into the ground. Your devices will run much better if you restart them every now and then to ensure that they aren’t being overworked.

What Use Is There for Your Task Manager?
You can imagine the look on someone’s face when their computer freezes up and it can’t run properly. Well, once upon a time, someone had the brilliant idea to include a task manager in a computer’ operating system to ensure that you can identify the problematic application (if there is one) and end its tasks without having to restart the computer. Overall, it’s a way to see how your computer’s resources are being allocated, as well as how to end troublesome tasks without restarting the computer.

Why Must Passwords Be Changed?
While some might argue that passwords should only be reset when they are discovered, this in-turn highlights why passwords should be reset frequently. Sometimes passwords will be stolen without the user knowing about it until they are being used against them, but other times, they will be stolen and sold on the black market to the highest bidder. It’s up to the user to make sure any passwords potentially stolen are changed before they can be used against your organization. The best way to protect against this from happening is to assume they will be stolen and change them periodically.

How Do Drivers Affect Your Work?
Drivers can be considered pieces of software that make your device compatible with a variety of external devices. You might have noticed that drivers must be installed on your device in order to use that USB mouse or wireless keyboard. These drivers must be kept up to date so that compatibility with devices doesn’t interfere with your work, and that security vulnerabilities are not presented to nefarious folks who want access to your systems and data.

Do you have any tips that you’d like to share with us? Let us know in the comments, and be sure to subscribe to our blog.

A Rose by Any Other Name
Frankly, it’s pretty easy to observe that “busy” and “productive” are anything but synonymous. We all know those people who seem to be constantly running around, working on this or that. Are these people busy? Certainly. Are they actually accomplishing anything? Maybe, maybe not.

Look at it this way - you can be ‘busy’ doing anything. However, in order to be ‘productive,’ you need to actually produce something. It doesn’t matter if it’s a completed sales proposal, an email explaining away the confusion around a particularly convoluted subject, or… anything else, really, as long as it helps to advance the business’ goals.

The Inherent Issue in Comparing the Two
Unfortunately, much of our context for determining between busyness and productivity comes from the least objective source there is - our own perception.

Look at it this way: let’s say that you gave a research assignment to two employees, with a deadline of an hour. If you left, only to return and see one employee watching YouTube videos, and the other one typing away, who would you see as being the productive one? In the moment, you would probably say that it was the employee who was still typing, and not the one watching videos on the Internet. However, what if I told you that the employee watching videos was actually watching videos related to the task you had assigned, and the other was working on what would likely be their fourth unpublished novel? Or that the employee watching the videos had long since completed the assignment, and was taking a well-deserved break, while the employee who was still typing was only doing so because they had goofed off for much of the time you were away?

This illustrates two considerations: how much different productivity really is than pure busyness, as well as how similar they have the potential to be. In order to keep from fooling yourself into thinking you’re being productive when you’re really just looking busy, try asking yourself a few questions as you commence.

For example, you can take a look at how you spend your time, and compare it to what your responsibilities really are at their core.

For instance, let’s say that Bill’s job was to ensure that the company remained secure. If Bill was able to complete all of his day’s tasks in the morning, but then spent the rest of his day reading things online, what would that be considered? Well, that depends. If Bill was reading the latest Bowling Enthusiasts Weekly articles at his desk for the rest of the afternoon, that’s hardly productive. However, if Bill was researching improved cybersecurity practices to enact in the company... that’s a pretty productive way to spend the time.

A Few ‘Keeping Busy’ Red Flags
Of course, none of the following activities have to be time-wasters, they just happen to be in most situations, or require a very specific job responsibility to be considered productive. For instance, many job responsibilities don’t actually require the Internet to be used, so any time spent on it is arguably a waste. The same can be said of social media, and especially email.

Of course, there are also many exceptions to this rule. In essence, you have to use your best judgement, evaluating if a given activity is actually the best use of your time or not.

Don’t forget, Coleman Technologies has plenty of solutions to help you boost your productivity. Reach out to us at (604) 513-9428 to learn more!

Costs
A lot of business owners don’t realize that creating cloud platforms has been completely possible for a long time. It wasn’t until public cloud offerings like SaaS or IaaS were made available that the business world really turned an eye toward these virtualized computing constructs. The reason was, of course cost. As cost goes down, options get more viable. One problem that businesses that have jumped into public cloud computing with both feet have found is that they haven't properly accounted for the risk inherent in hosting their business’ data and infrastructure with someone else. These risks can significantly reduce (or in some cases decimate) the ROI of a cloud computing initiative.

One of the major risks, loss of data security, has driven many organizations toward a more private cloud strategy. Building a private cloud can be complicated as it involves calculating both fixed and recurring costs over a pertinent time frame. Since with a private cloud platform, an organization will be responsible for the hardware systems, management, and control, variables such as usage (forecasted/actual), system and data redundancy, and the general specifications of the machines used to run the virtualized infrastructure have to be taken into account.

So, while it’s true that public cloud costs are also difficult to determine, when settling in on a private cloud solution, you need to dot your i’s and cross your t’s at every turn to ensure that you are properly forecasting what the private cloud will cost your company in both migration and operation.

Integration
Chances are your business already uses several public cloud applications, and some of those applications function better, and more cost-effectively, if left there. You see, if you utilize public cloud resources to host non-critical infrastructure or applications, you will likely want to consider setting up a hybrid cloud system, where your private cloud and your public cloud resources are integrated.

This hybrid cloud platform will absolutely have its difficulties, but once it is up and running, your business’ computing will be accessible through one single access portal. If you so choose to reinforce this strategy with secure access control systems you can do that, but know that it requires a lot of effort to include security provisions and configurations to allow workloads to be run anywhere.

Time
One big problem many businesses have when deciding to move a portion of their IT out of the public cloud and into their own private cloud is just the time it will take to get this finished. These virtualized computing environments are more robust than ever and can facilitate a lot of organizational flexibility, but operational issues and hardware management of on-premise hardware is time consuming and costly.

Not only does your IT admin (and team) need time to configure and migrate all relevant data, they will be on the hook for all the maintenance and management of the virtual machines and the underlying hardware, making it problematic for small IT teams.

At Coleman Technologies, we know how important collaborative work environments are, we also know how crucial data security is. As a result, we are in a great position to help you. Our technicians can work with you to find the right balance between public and private cloud resources, while having the technical expertise to help manage and maintain any computing environment or infrastructure. If you would like more information about hosted solutions, whether they be on the web or in your server room, our technicians can help. Call us today at (604) 513-9428.

Google.com
There are few resources out there that are as valuable as Google’s website. Even the act of “googling” something has become a verb. Granted, “googling” a query might not yield the results the user is expecting, which can lead to frustration. By effectively using search commands, you can make any Google search more accurate, saving time better spent actually using the plethora of knowledge you have at your fingertips.

Tip #1: Use the Tabs
Google has built-in search functionality for images, videos, news, and so much more. There are tabs for images, news, videos, maps, shopping, books, flights, and finance. You can use each of these to narrow down the results you get when you make a specific query.

#2: Use Quotes
Even if you type in what you’re looking for, Google will sometimes misconstrue what you’re looking for as something else. If you’re looking for a specific phrase, you can use quotes around it to find exactly what you’re looking for.

Example: “happy days”

The results will be the term or phrase exactly as it’s typed.

#3: Use a Hyphen to Exclude Words
Think of the hyphen as the “minus” sign of Google searches. If you have a word that you’d rather omit from a search, place a hyphen in front of it.

Example: scale -weight

By removing the topic of one of the homonyms from the equation, you will get more targeted and accurate results.

#4: Use a Colon to Search Specific Sites
If you know that what you’re searching for is found on a specific website, you can limit the search to that site with a colon.

Example: Virtualization site:azure.microsoft.com

In the above example, you can also use a specific keyword to include it in your search.

#5: Search Locally
Google can determine your location, giving you a lot of power to find local businesses, restaurants, institutions, you name it. Just type it into Google.

Example: Laundromats nearby.

Just make sure you have your location services on if mobile. Otherwise, the search engine will use your Internet connection’s IP address to figure out what’s close to you.

What are some of your favorite ways to use Google? Let us know in the comments.